Fabric Friendship Bracelet

Fabric Friendship Bracelet:



What you'll need:

- fabric strips (about 2ft long, preferably cotton)
- a clip to hold your fabric

How to do it:

1. Choose 3 strip of fabric. Secure it with your clip to keep it in place.



2. Start braiding your fabrics. When you get close to the end, measure the bracelet to your wrist.
Since this is a slip on bracelet, you would want to make sure you have enough room to wiggle the bracelet over your hand.



3. Once you have made the bracelet to fit your hand, sew both ends of the bracelet together. Make sure that all the fabrics have been sewn together.



4. Trim off the strings and cut the fabric to just above where you sewed.



5. To cover up the sewed edges, cut or tear a piece of fabric about 2 inches wide and about 8 inches long. Slip the fabric into the bracelet where you sewed the ends and tie a single knot. Trim off the extra fabric from your knot. 





Enjoy!


DIY Gold Twig Bangles

DIY Gold Twig Bangles: 

How to make your own twig bangle.

What you'll need:

- Some twigs (Fresh is best as they are more bendy than if they have dried out)
- Gold Metallic Spray Paint
- Glue or glue gun
- some thread



How to do it:

1. Cut the twigs into lengths to make a circle that fits your hand.
2. Bend them into the rounded shape, doubling up the end.
3. Wrap the doubled up end with thread to secure the bangle shape.
4. Put a dot of glue and to secure the thread.
5. Spray paint the bangles – making sure to coat entirely. Do a few coats if necessary.
6. Let dry completely.







Enjoy!

The Hippie Bracelet


 

The Hippie Bracelet:

What you'll need:

- 7 embroidery threads, 60 inches each (folded in half to make 14 working strings)

What you'll need:

1. Start with your favorite way of starting a bracelet. this could be a buckle, a braid on each end (in this case, your starting strings should be a bit longer), or a simple overhand knot. I chose to make my version of the buckle. Search the tutorial page for directions.


2. Pick your first color. This will be your first wrapping string. Set aside.


3. Pick two more strings. These will be your "criss-cross" strings. These strings are optional; you may use them once in awhile, or not at all. They can be the same or different color. Set aside.


4. With your optional criss-cross strings up and out of the way, take your wrapping string and make half a forward knot around the rest of your strings.



5. Begin wrapping! Simply wrap this thread tightly around your bunch of strings, making sure there is no overlap or spaces.


6. Decide how much of your bracelet you'd like wrapped in this color. You could wrap your entire bracelet in this color, but for this bracelet, I'm going to stop at about 3/4 inch. To keep the string from unraveling, tie another half forward knot.


7. Now's the time to use your optional criss-cross threads. take the two strings and tightly criss-cross the threads a few times around the section you just wrapped.


8. Holding your criss-cross threads in place, choose another wrapping thread and two more criss-cross threads. Set your new criss-cross threads aside, use your new wrapping thread to tie a half forward knot around all remaining threads, and repeat!



 

 

Enjoy!

A cute little vintage idea

Vintage shoe box suitcase:

What you'll need:


- Shoe boxes
- White paint
- Markers

How to do it:

1. Grab your shoe boxes.

2. Paint them in white.

3. Let them dry.

4. Then doodle on them to make them look like vintage suitcases.
Done! So so simple!

Enjoy!

DIY Watercolor Pillows


DIY Watercolor Pillows:
The Rhythm of Orange - Abstract - Art Watercolor Painting by Suisai Genki, Throw pillow cover - 16x16 - 18x18"


















What you'll need:


- pillowcase
- acrylic paint or fabric paint (not watercolors)
- water
- brushes
- card board
- paint mixing surface
How to do it:

1. Grab your pillow case.



2. Mix some water with your paint. The thinner the paint the lighter the color. Test it on some scrap fabric first, and start with a lighter color if you're worried. You can always add more paint later.



3. Make sure to put a cardboard between the layers of your pillowcase before painting so then the paint doesn't go through both layers.

4. Paint your pillowcase how you would like it to look.
Here are some inspirations:









5. Once finished, let it dry.

And there you have it. A beautiful watercolor pillow!

Enjoy!

Paper Butterflies

Paper Butterflies

What you'll need:


  • Old wall paper cut offs or thick pretty paper. I used the same paper for the whole project. I had off cuts of the Osborne & Little paper 'Soubise' that really suited Miranda's moroccan-esque nursery.
  • A printer and A4 paper for making your stencils.
  • Bits of cardboard.
  • A pencil.
  • Paper scissors.
  • Blu tac.

How to do it :

1. Print out some butterfly shapes - you'll find a ton via a Google search. Then cut out the butterflies from the paper. The different sizes make the result much more interesting and realistic.



2. Trace around the paper onto the cardboard and cut them out. Alternatively, you can print straight on to cardboard if your printer is that talented. These are your stencils!



3. Trace lots and lots of the butterflies onto the back of your paper and cut them out.

Cutting them out is the kinda thing you can do in front of the TV. It takes about an hour. You'll get really fast at it. They don't have to perfectly cut either, they just have to look like butterflies.

Fold them down the middle so they have little flappy wings!





4. Ok this is the fun bit. Put a dot of blu-tac on the underside and start attaching them to your wall. Pinch the wings up a bit and press into the spine with your thumbnail to stop them attaching flat to the wall.

There is a teensy bit of design in the arrangement of the butterflies. You want them to sort of move in the same direction.  Mix up the sizes. I thought the little ones were more like to stray so I added a few of them around the edges. I followed a general funnel shape - as if they were all flying out of a box into the open air!





All done! Now admire your work.



 

    

Enjoy!





DIY book clutch



DIY Book Clutch: inspired by Natalie Portman's Lolita Book Clutch

What you'll need:

- a hardcover book
- a clasp
- glue
- a paintbrush
- a ruler
- an x-acto knife                                                                                              


How to do it:

















http://runwaydiy.com



Enjoy!